Rea u amohela CHUANGRONG
PRISMA125 /160 Mochini oa ho sebetsa / oa Kaho ea Socket Fussion Welding mochini o Sebelisang liphaephe le lisebelisoa
Litaba tsa Motheo
| Tšebeliso: | Socket Pipe Welding | Tiisetso: | 1 Selemo |
|---|---|---|---|
| Sebaka sa ho sebetsa: | 25-125mm / 75-160mm | Lisebelisoa: | HDPE, PP, PB, PVDF, PPR |
| Lisebelisoa: | Ntho e le 'Ngoe | Mocheso oa Mosebetsi: | 180-280 ℃ |
| Lebitso la Sehlahiswa: | Mochini oa Ppr Socket Fusion |
'Mele o na le likarolo tse' nè tsa tšepe tse ikemetseng bakeng sa lipeipi tse notlelang le li-fittings (li-brand tse sa tšoaneng), li-welder tse ikemetseng tse nang le taolo ea mocheso oa elektronike le lisebelisoa. Bakeng sa botebo bo phahameng ba ho futhumatsa, ho na le trolley e thellang, tripod bakeng sa ho tšehetsa phala, sokete le plug bakeng sa fused ho tloha Ø25 ho Ø125 mm kapa 75-160mm sockets e nang le matlo a tšepe.
standard composition-'Mele o na le socket socket welder-Steel housing e nang le Ø25 ho Ø125 mm sehokelo sa sokete le lisebelisoa tsa lisebelisoa- Pipe support tripod- On-demand sliding car
Tlhaloso ea Sehlahisoa
| 1 | Sefuthumatsi |
| 2 | Lever bakeng sa motsamao oa heater |
| 3 | Soketeng |
| 4 | Mokhanni oa fuse |
| 5 | Sesebelisoa sa heater |
| T | Thermo regulator |
| 6 | Tšoara bakeng sa ho phahamisa |
| 7 | Mokhethi oa bophara |
| 8 | Locking lever |
| 9 | Mohlahare |
| 10 | Lebili la letsoho bakeng sa motsamao oa likariki tse eang pele |
| 11 | Konopo bakeng sa boemo ba liphaephe |
| 12 | Peipi ya ho notlela/ho notlolla ka letsoho |
| 13 | Sefate sa trolley |
| 14 | Maoto a trolley |
| 15 | Mabili a trolley |
| 16 | T-wrench 5 mm |
| 17 | Sockets |
| 18 | Pin bakeng sa li-sockets |
| 19 | Allen wrench 6 mm |
| PRISMA125/160 | 110 Volt | 230 Volt |
| Li-diameter tse lumellanang [mm]: | Ø20÷ Ø 125/160 | |
| Phepelo ea motlakase: | 110 VAC 50/60 Hz | 230 VAC 50/60 Hz |
| Matla a phahameng a huloang: (W) | 2000 | |
| Litekanyo nakong ea lipalangoang lxlxh (mm) | 1460x700x1080 | |
| Litekanyo ha o sebetsa lxlxh (mm) | 1500x840x1260 | |
| Boima ba mochini o felletseng [kg]: | 100 | |
| Lebokose la lipalangoang (litekanyo) lxlxh (mm) (*) | 1420x820x930 | |
| Lebokose la lipalangoang (boima) [kg] (*) | 40 | |
(*):Ka kopo
| LITŠOANTŠISO TSA TŠEBELETSO LE LITHUTO | |
| 1 | Lebokose la li-socket le lisebelisoa |
| 2 | Keketso ea bophara ba mehlahare Ø 110÷ Ø 160mm |
| 1 | Allen wrench 6 mm |
| 1 | T-wrench T 5 mm |
| 1 | Pin bakeng sa li-sockets |
| 1 | Tšehetso ea liphaephe |
Ka kopo Pipe tšehetso tripod
| LIEKETSENG TSOHLE | ||||||||||
| 25 Ø | 32 Ø | 40 Ø | 50 Ø | 63 Ø | 75 Ø | 90 Ø | 110 Ø | 125 Ø | 140 Ø | 160 Ø |
| MOTOKOLO |
| Bukana ea mosebelisi le tlhokomelo |
| Phatlalatso ea ho lumellana |
| Merero ea motlakase |
ThePRISMA125/160 ke mochini oa sebaka sa ho futhumatsa poleiti, bakeng sa fusion ea socket ea liphaephe le li-fittings tsa polyethylene (PE), Polypropylene (PP), Polyvinylfluoride (PVDF) le Polybutylene (PB) ka bophara bo pakeng tsa 25 le 125 mm.
MohlalaPRISMA125/160 e lumella ho etsoa ha li-weldings pakeng tsa liphaephe le li-fittings, e tlameha ho sebelisoa ka ho khetheha ke basebetsi ba nang le tsebo le ba koetlisitsoeng ka ho latela ka tieo melao e thehiloeng.
Re romelle molaetsa oa hau:
Lihlopha tsa lihlahisoa
-
Pipe ea polasetiki 40-160mm /75-250mm/90-315mm/110-35...
-
16 Bar PP Compression Fitting , Tube Reducing C...
-
Boholo bo boholo 380V/415V CRDH630-800/CRDH630-1000 ...
-
100% PE100 Virgin Material ISO / ASTM Standard...
-
Plastic e Tala PPR 90 Degree Elbow Smooth Surfac...
-
OEM ODM E tšehelitsoe ka Nosetso ea HDPE SDR26-SDR11 ...
Lihokelo tsa Sechaba
Khampani ea rona
tlhahisoleseding
Lihokelo tse Potlakileng
iteanye le rona
- KENYA:
Kamore ea 911, Mohaho oa T1, Setsi sa Ring, No.333 Dongda Road, Chengdu, Chaena.
- TEL: 0086-18180897627
- EMAIL: chuangrong@cdchuangrong.com
Lihlahisoa tse chesang - Sebaka sa marang-rang - AMP Mobile
Adapter ea banna, Hdpe Pipe Fitting, Hdpe Pipe And Fitting, Pepe ea Metsi, Tokiso Clamp, Lisebelisoa tsa Pipe tsa Hdpe,
-
Mohala
-
E-mail
-
Whatsapp
-
Skype
-
Holimo
