China Black PE100-RC Hanyetsa Crack Corrosion Resistance HDPE Pipe Bakeng sa Tlhahiso ea Phepelo ea Metsi le Khase le Feme |CHANGRENG

PE100-RC e Ntšo e Hanyetsa Crack Corrosion Resistance HDPE Pipe Bakeng sa Metsi le Khase e Fepeloang Setšoantšo se Kenyelitsoeng

PE100-RC e Ntšo e Hanyetsa Crack Corrosion Resistance HDPE Pipe Bakeng sa Phepelo ea Metsi le Khase

Tlhaloso e Khutšoanyane:

1. Boholo:DN20-1600mm bakeng sa Phepelo ea Metsi.

2. Khatello :SDR33- SDR7.4, PN4-PN25.

3. Boitsebiso:100% Moroetsana PE80, PE100, PE100-RC.

4. Maemo:ISO 4427, EN 12201, ASTM F714,AS/NZS 4130, DIN 8074, GOST 18599, IPS.

5. Ho paka:11.8m, kapa 5.8m/pcs bakeng sa ho otloloha, 50-200m ka likhoele bakeng sa DN20-110mm.

6. Thomello:Matsatsi a 3-15 ho itšetlehile ka palo eohle.

7. Tlhahlobo:Tlhahlobo ea thepa e tala.Tlhahlobo ea sehlahisoa e felileng

8. Lisebelisoa:OD20-1600mm, SDR26-SDR7.4, Socket fusion, Butt fusion, Electrofusion, Fabricated, Machined, Compression fittings.

Re romelle lengolo-tsoibila Romela lengolo-tsoibila

Lintlha tsa Sehlahisoa

Tlhaloso & Tshebetso

Kopo&Setifikeiti

Li-tag tsa Sehlahisoa

Litaba tsa Motheo

Morero oa CHUANGRONG ke ho fa bareki ba fapaneng tharollo e phethahetseng ea sebaka se le seng bakeng sa sistimi ea lipeipi tsa polasetiki.E ka fana ka litšebeletso tse entsoeng ka bokhabane, tse etselitsoeng morero oa hau.

PE100-RC e Ntšo e Hanyetsa Crack Corrosion Resistance HDPE Pipe Bakeng sa Phepelo ea Metsi le Khase

Lintlha tsa Lihlahisoa		Khampani/Matla a Feme
Lebitso	Pipe ea Metsi a Nooang a Phahameng ka ho Fetisisa (HDPE).	Bokhoni ba Tlhahiso	100,000 Ton/Selemo
boholo	DN20-1600mm	Mohlala	Mohlala oa mahala o teng
Khatello	PN4- PN25, SDR33-SDR7.4	Nako ea thomello	Matsatsi a 3-15, ho itšetlehile ka bongata
Litekanyetso	ISO 4427, ASTM F714, EN 12201, AS/NZS 4130, DIN 8074, IPS	Teko/tlhahlobo	Laboratori e tloaelehileng ea naha, tlhahlobo ea pele ho thomello
Lisebelisoa tse so ntlafatsoe	100% Virgin l PE80, PE100, PE100-RC	Litifikeiti	ISO9001, CE, WRAS, BV, SGS
Mmala	E ntšo e nang le metsero e putsoa, 'mala o Boputsoa kapa mebala e meng	Tiisetso	Lilemo tse 50 ka tšebeliso e tloaelehileng
Ho paka	5.8m kapa 11.8m/length, 50-200m/roll, bakeng sa DN20-110mm.	Boleng	Sistimi ea QA & QC, Etsa bonnete ba hore ts'ebetso e ngoe le e ngoe e fumaneha habonolo
Kopo	Metsi a nooang, Metsi a hloekileng, Mokelikeli, Oli le Khase, Meepo, Ho Hlōla, Marine, Nosetso, Indasteri, Lik'hemik'hale, Ho loantša mollo ...	Tshebeletso	R&D, tlhahiso, thekiso le tlhomamiso, ka mor'a-thekiso tšebeletso
Lihlahisoa tse tsamaellanang: fusion ea Butt, Socket fusion, Electrofusion, Drainage, Fabricated, Machined fittings, Compression fittings, Plastic Welding machine and tools, jj.

Rea u amohela ho etela feme ea rona kapa ho etsa tlhahlobo ea mokha oa boraro.

Rea u amohela ho ikopanya le rona bakeng sa lintlha tsa lihlahisoa le tšebeletso ea litsebi.

Ka kopo, romella lengolo-tsoibila ho:chuangrong@cdchuangrong.com

Tlhaloso ea Sehlahisoa

CHUANGRONG PE100-RC DN20-DN1600 HDPE PIPE

Lisebelisoa tsa liphaephe tsa polyethylene li fetile mekhahlelo e 4.

Mokhahlelo oa pele o qalile lilemong tsa bo-1950, 'me haholo-holo o ne o e-na le polyethylene macromolecules ntle le branching;ea bobeli e ne e le thepa ea PE80;ea boraro e ne e le thepa ea PE100;ea bone e fetisitse moralo oa sebopeho sa Limolek'hule.

Polao e phahameng ea polyethylene PE100-RC ha e boloke feela toughness e babatsehang, ho hanyetsa ho apara hantle le ho hanyetsa ha kutu ea pipe ea PE100, empa hape e na le litšobotsi tse latelang:

1, Ka boima bo phahameng:phahameng toughness polyethylene PE100-RC phala elongation ka khefu ea ho feta 500%, matla a tshusumetso e phahameng, ho hanyetsa ho tsosoa ka matla le khopameng.Tlas'a liphetoho tse fapaneng tsa crustal tse kang ho fokotseha ha fatše le tšisinyeho ea lefatše, phaephe e ke ke ea robeha 'me e na le tšireletso e phahameng.

2,Ho hanyetsa ho hoholo ha khatello ea maikutlo:polyethylene e phahameng ea PE100-RC pipe e na le boima bo phahameng, bophelo bo tloaelehileng ba tšebeletso ea lilemo tse fetang 100.Haeba lerako le kantle la phaepe le hahloa nakong ea lipalangoang kapa kaho, botebo ba mongoao bo ka tlase ho 20% ea botenya ba lerako, hobane sekhahla sa kholo ea eona ea ho hanyetsa mapheo ke karolo ea leshome feela ea thepa e phahameng ea PE100, e ka etsa bonnete ba hore e sebetsa hantle. ts'ebetso e tloaelehileng ea phala le ho lelefatsa bophelo ba tšebeletso.Ka mokhoa o ts'oanang, ha botebo bo tebileng ba phala e phahameng ea PE100 bo feta 10% botenya ba lebota, bo ke ke ba fihlela litlhoko tse tloaelehileng.

3,Ho hanyetsoa ke mengoapo:Hobane boima ba holim'a PE100 -RChigh toughness polyethylene s pipe e phahame ho feta ea PE100 e phahameng, tlas'a ts'ebetso e ts'oanang ea ho phunya, botebo ba sekoti bo fokotsehile ka 1/3 ~ 1/2 ho feta phala ea PE100 e phahameng. .

4, Ho hanyetsa ho hoholo ha ntlha:Nakong ea ts'ebetso ea pipeline, lerako le ka ntle le hatelloa ke lintho tse thata tse kang majoe mobung ka nako e telele, ho etsa khatello ea maikutlo e ka hare, e bitsoang point load.PE100-RC polyethylene pipe e matla e ka thibela ts'enyo ea sebaka, ea etsa hore ts'ebetso ea liphaephe e sireletsehe le ho tšepahala haholoanyane, 'me e kopane le tšebeliso ea lipeipi ka lilemo tse 50.Nakong ea ts'ebetso ea phala e phahameng ea PE100, lerako le ka ntle le hatelloa ke lisebelisoa tse thata tse kang majoe ka nako e telele, e leng se tla etsa hore lerako le ka hare la phala le phunyeletse le ho phunyeha ha brittle sebakeng seo.

CHUANGRONG e na le sehlopha se hloahloa sa basebetsi se nang le boiphihlelo bo bongata.Sehlooho sa eona ke Integrity, Professional and Efficient.E thehile likamano tsa khoebo le linaha le libaka tse fetang 80 indastering e amanang.Tse kang United States, Chile, Guyana, United Arab Emirates, Saudi Arabia, Indonesia, Malaysia, Bangladesh, Mongolia, Russia, Afrika joalo-joalo.

Rea u amohela ho ikopanya le rona bakeng sa lintlha tsa lihlahisoa le tšebeletso ea litsebi.

Ka kopo, romella lengolo-tsoibila ho: chuangrong@cdchuangrong.com kapa Mohala:+ 86-28-84319855

E fetileng: China Wholesale 180mm Pe Pipe Manufacturers – ISO4437 HDPE Pipe PE80 kapa PE100 MDPE Pipe For Gas Supply – CHUANGRONG

E 'ngoe: PE80/PE100 20-110mm Socket / Fusion Stop Valve Plumbing Water System

PE100-RC Resist Crack Corrosion Resistance HDPE Pipe Bakeng sa Phepelo ea Metsi le Khase

PE100	0.4MPa	0.5MPa	0.6MPa	0.8MPa	1.0MPa	1.25MPa	1.6MPa	2.0MPa	2.5MPa
Kantle Diameter (mm)	PN4	PN5	PN6	PN8	PN10	PN12.5	PN16	PN20	PN25
	SDR41	SDR33	SDR26	SDR21	SDR17	SDR13.6	SDR11	SDR9	SDR7.4
	Botenya ba Lebota (en)
20	-	-	-	-	-	-	2.0	2.3	3.0
25	-	-	-	-	-	2.0	2.3	3	3.5
32	-	-	-	-	2.0	2.4	3.0	3.6	4.4
40	-	-	-	2.0	2.4	3.0	3.7	4.5	5.5
50	-	-	2.0	2.4	3.0	3.7	4.6	5.6	6.9
63	-	-	2.5	3.0	3.8	4.7	5.8	7.1	8.6
75	-	-	2.9	3.6	4.5	5.6	6.8	8.4	10.3
90	-	-	3.5	4.3	5.4	6.7	8.2	10.1	12.3
110	-	-	4.2	5.3	6.6	8.1	10.0	12.3	15.1
125	-	-	4.8	6.0	7.4	9.2	11.4	14	17.1
140	-	-	5.4	6.7	8.3	10.3	12.7	15.7	19.2
160	-	-	6.2	7.7	9.5	11.8	14.6	17.9	21.9
180	-	-	6.9	8.6	10.7	13.3	16.4	20.1	24.6
200	-	-	7.7	9.6	11.9	14.7	18.2	22.4	27.4
225	-	-	8.6	10.8	13.4	16.6	20.5	25.2	30.8
250	-	-	9.6	11.9	14.8	18.4	22.7	27.9	34.2
280	-	-	10.7	13.4	16.6	20.6	25.4	31.3	38.3
315	7.7	9.7	12.1	15	18.7	23.2	28.6	35.2	43.1
355	8.7	10.9	13.6	16.9	21.1	26.1	32.2	39.7	48.5
400	9.8	12.3	15.3	19.1	23.7	29.4	36.3	44.7	54.7
450	11	13.8	17.2	21.5	26.7	33.1	40.9	50.3	61.5
500	12.3	15.3	19.1	23.9	29.7	36.8	45.4	55.8	-
560	13.7	17.2	21.4	26.7	33.2	41.2	50.8	62.5	-
630	15.4	19.3	24.1	30	37.4	46.3	57.2	70.3	-
710	17.4	21.8	27.2	33.9	42.1	52.2	64.5	79.3	-
800	19.6	24.5	30.6	38.1	47.4	58.8	72.6	89.3	-
900	22	27.6	34.4	42.9	53.3	66.2	81.7	-	-
1000	24.5	30.6	38.2	47.7	59.3	72.5	90.2	-	-
1200	29.4	36.7	45.9	57.2	67.9	88.2	-	-	-
1400	34.3	42.9	53.5	66.7	82.4	102.9	-	-	-
1600	39.2	49	61.2	76.2	94.1	117.6	-	-	-

PE100-RC Super Tough Polythylene Pipe Thepa ea 'Mele le Mechini

Che.	Tshebetso	Yuniti	Tlhokahalo	Tlhokahalo	Tlhokahalo
1	Matla a hydrostatic	h	Ha ho tšenyo, ha ho dutla	20℃, 12.0MPa , ≥100h	GB/T 6111
				80℃,5.4MPa,≥165h
				80℃, 5.0MPa,≥1000h
2	Elongation nakong ya khefu e≤5mm	%	≥350b,c	mofuta oa 2d 100mm／min	GB/T 8804.3
	Elongation nakong ya khefu 5mm＜e≤12mm			mofuta oa 1d 50mm／min
	Elongation nakong ya khefu hoo e ka bang 12 limilimithara			mofuta oa 1d 25mm／minmofuta oa 3d 10mm/min
3	Khanyetso ea ho hola butle (teko ea khoune ea phala)) en≤5mm	mm/48h	<1	80 ℃	GB/T 19279
4	Khanyetso ea khōlo e fokolang ea crack (teko ea notch ea pipe) en＞5mm	h	nako ea ho hlōleha ≥8760	80 ℃,0.92MPa (khatello ea teko)	GB/T 18476
5	Teko e felletseng ea li-incision creep (FNCT)	h	nako ea ho hlōleha ≥8760	80℃,4.0MPa,2% nonylphenol polyoxyethylene ether solution	DIN/PAS 1075
6	Teko ea boima ba lintlha	h	nako ea ho hlōleha ≥8760	0℃,4MPa,2% nonylphenol polyoxyethylene ether tharollo	DIN/PAS 1075
7	Khanyetso ea kholo ea Crack e potlakileng (RCP)	Mpa	Likhomphutha≥MOP/2.4-0.072	-	GB/T 19280
8	Pholiso ea Khatello	-	Likhomphutha≥MOP/2.4-0.072	0℃	GB／T 15558.1-2015
9	Ho tsitsa ha mocheso	min	>20	200 ℃	GB/T 19466.6
10	Thermal botsitso (MFR)	g/10 mets	phetoho pele le ka mora ho sebetsa ＜20％	5kg,190℃	GB/T 3682
11	Ho hula ha longitudinal (botenya ba lebota ≤16mm)	%	≤3, ha ho na tšenyo holim'a metsi	110 ℃, 200mm, 1h	GB/T 6671

a.Ke ho hloleha ha brittle feela ho nahanoang.Haeba ho hloleha ha ductile ho etsahala pele ho 165h, khatello e tlase le nako e lekanang ea ho hloleha e khethoa ho latela maemo a ho hlahlojoa hape.

b.Haeba tšenyo e etsahala ka ntle ho sebaka se tloaelehileng, tlhahlobo e nkoa e fetisitsoe haeba boleng ba teko bo finyella litlhoko.

c.Ha tekanyo e hlokahalang ea teko e fihleloa, tlhahlobo e ka emisoa ntle le tlhokahalo ea ho hlahloba ho fihlela sampuli e senyehile.

d.Haeba ho khonahala, pipe e nang le botenya ba lebota e seng kholo ho feta 25mm e ka boela ea sebelisoa mofuta oa 2 sampole, mofuta oa 2 oa mohlala ka mochini kapa mokhoa oa ho bopa.

e.Bakeng sa litekanyetso tsa khatello tse tsamaellanang le letoto le leng la SDR, bona GB/T 18476.

f.Teko ea RCP e tla etsoa feela ha phala e hlahisoang ke moetsi oa liphaephe e le kholo ho feta botenya ba lebota la phala e sebelisoang tekong ea RCP e fanoeng ke moetsi oa metsoako e tsoakiloeng.Ha e sebelisoa ka tlase ho 0 ° C, liteko tsa RCP lia hlokahala ka mocheso ona ho fumana khatello e boima ka mocheso o fokolang oa ho sebetsa. Ha u etsa liteko ho latela GB/T 19280, haeba tlhahlobo ea S4 e hloleha ho fihlela litlhoko, tlhahlobo e lokela ho hlahlojoa hape ho latela tlhahlobo ea boholo bo felletseng, 'me liphetho tsa tlhahlobo ea boholo bo felletseng li lokela ho sebelisoa e le kahlolo ea ho qetela. motheo.

Rea u amohela ho ikopanya le rona bakeng sa lintlha tsa lihlahisoa le tšebeletso ea litsebi.

Ka kopo, romella lengolo-tsoibila ho: chuangrong@cdchuangrong.com kapa Mohala:+ 86-28-84319855

Liphaephe tsa HDPE esale li le teng ho tloha bohareng ba 50′s.Boiphihlelo bo bonts'a hore liphaephe tsa HDPE ke tharollo mathateng a mangata a liphaephe tse amoheloang ke bareki le baeletsi ba boenjiniere e le thepa e loketseng ea liphaephe bakeng sa khatello e ngata le lits'ebetso tse sa netefatsoang ho tloha kabong ea metsi le khase ho ea matla a khoheli, likhoerekhoere le drainage ea metsi a holim'a metsi bakeng sa tse peli tse ncha. & Merero ea Tsosoloso.Liphaephe tsa Chuangrong polyethylene li thehiloe holim'a polytholefin thermoplastic resin eo hape e leng thepa e sa chefo ea physiologically, ka hona, e loketse mefuta e mengata ea likopo.

E loketse:

Metsi Phepelo. ChuangrongLiphaephe tsa PE li entsoe ka thepa e finyellang tlhokahalo ea chefo ea WHO 'me sena se ka sebelisoa bakeng sa ho tsamaisa metsi a nooang.

-Liphaephe le lisebelisoa tse nang le likhatello tsa khatello ea SDR 7.4 ho fihla ho SDR 41 bakeng sa lisebelisoa tsa metsi hammoho le mekhoa ea ho tsamaisa lipeipi le litsela tsa litšebeletso.

- Hlakola lipeipi le lisebelisoa bakeng sa lipeipi tsa kamore ea metsi ea selemo.

-Lipeipi tse nyolohang bakeng sa liliba.

Ho fapana le liphaephe tse hlanyang ka tšepe kapa tšepe ea ductile, lisebelisoa tsa liphaephe tsa HDPE li boima bo bobebe ebile ha li na kutu.Leha e le mobu o bolila kapa metsi "a mabifi" a ke ke a ba le phello ho thepa.Ho feta moo, lihlahisoa tsa kutu, tseo hangata li sitisang ts'ebetso ea sistimi ea liphaephe, lia qojoa.Ha ho bapisoa le liphaephe tsa PVC, liphaephe tsa HDPE li fetoha habonolo 'me li fana ka khanyetso e matla esita le mochesong oa zero.Liphaephe li ka fetoloa habonolo ho sebopeho sa foro ntle le ho sebelisa lisebelisoa tse eketsehileng.Lisebelisoa tsa liphaephe tsa HDPE (li-spigot le li-socket joints) li fana ka mefuta e mengata ea mekhoa ea ho hokahana ea longitudinal.Ka hona, ho kenngoa ha li-ankora kapa li-thrust blocks ha ho hlokahale 'me tsamaiso ea liphaephe ea ho lutla e nang le nako e telele e tiisitsoe.

Ho noa haholo metsi boleng.Ho tšoaneleha ha thepa bakeng sa metsi a nooang ho netefatsoa ka liteko tse ikemetseng.Tatso kapa monko oa metsi a nooang ha li amehe ka lebaka la ho kopana le liphaephe tsa HDPE.Sebaka se boreleli le khanyetso e phahameng ea abrasion li tiisa bonyane ba depositi.Polyethylene ha e bolae ke kutu, ka hona, metsi a nooang a ke ke a silafatsoa ke lihlahisoa tsa koporo kapa tse boima tse kang cadmium kapa lead, tse etsahalang khafetsa ka lipeipi tsa khale tsa tšepe.

TikolohoLisebelisoa tsa botsoalle bakeng sa tikoloho e hloekileng. The HDPE liphaephe le loketseng ba ka ho khetheha e entsoeng ka thepa e baballang tikoloho.Mohlala, litlhoko tsa matla bakeng sa tlhahiso ea liphaephe tsa HDPE li tlase ka lebaka la tlhahiso ea liphaephe tse entsoeng ka polyethylene.Tšebeliso ea lisebelisoa tsa liphaephe tsa HDPE e fana ka tharollo e molemohali bakeng sa tikoloho.Ho ka 'na ha kengoa tsamaiso ea 100% ea bopaki bo lutlang ka mekhoa e bonolo ea ho cheselletsa.Kahoo, ho beha metsi a nooang kotsing ka lintho tse chefo hoa fokotseha.Ho feta moo, tahlehelo ea metsi ka lebaka la liphaephe tse lutlang lia qojoa.Ha ho tsamaiso e 'ngoe ea phepelo e fanang ka melemo ena.

Bakeng sa feteletseng maemo. Lisebelisoa tsa liphaephe tsa HDPE li lumelletsoe ho kenngoa mefuteng eohle ea mobu.Polyethylene ke ts'ebeliso e bonolo ea mekhoa e fapaneng ea ho kopanya e kenyelletsang sistimi ea phepelo ea bopaki bo lutla.Ka lebaka la boima bo bobebe le mekhoa e bonolo ea ho kopanya, liphaephe tsa HOPE li loketse haholo bakeng sa maemo a sa thabiseng- bakeng sa ho kenngoa libakeng tse thata.

Mokelikeli oa metsi.Chuangronglipeipi li ntse li sebelisoa bakeng sa ho ntša metsi a ka tlas'a lefatše bakeng sa meaho, likhoele tsa litšila bakeng sa maro a senyang hape e le thepa e phethahetseng bakeng sa moetsi oa lipeipi tse kholo bakeng sa tsamaiso ea likhoerekhoere. likhoerekhoere tse ka tlas'a lefatše le lipeipi tsa litšila.

Indasteri.Lintho tse kang tse thibelang kutu, ho kenya habonolo, boima bo bobebe, le ho tenyetseha habonolo li etsa hore liphaephe tsa chuangrong li loketse lipeipi tse rarahaneng lifemeng.Li loketse lik'hemik'hale tse senyang.

Khase le Pipe ea oli Litsamaiso. PEliphaephe ho tsamaisa lipeipi tsa tšepe tsa carbon ho tsamaisa oli le likhase ka khatello e phahameng li fumaneha.Liphaephe li entsoe ka mokhoa o khethehileng ka holim'a metsi a boreleli 'me li entsoe hore ho be bonolo ho li kenya.Kahoo mehala ea khase e ka kenngoa ka litšenyehelo tse tlase.Ha ho cheka li sebelisoa e le mekoti ea lithunya kaha li theko e tlaase.Ka lebaka la thepa e babatsehang ea HDPE, e bonts'ang matla a ts'ebetso e phahameng le mobu o matla haholo oa ho hanyetsa mobu o mabifi. Ho kopantsoe le boiketlo ba ho tšoara le ho kenya, liphaephe tsa HDPE li ntle haholo bakeng sa ho tsamaisa thepa le mefuta e meng ea khase ho kenyeletsoa bio-gas.

CHUANGRONG e na le mekhoa e felletseng ea ho lemoha ka mefuta eohle ea lisebelisoa tsa ho lemoha tse tsoetseng pele ho netefatsa taolo ea boleng lits'ebetsong tsohle ho tloha ho thepa e tala ho isa sehlahisoa se felileng.Lihlahisoa li lumellana le ISO4427/4437, ASTMD3035, EN12201/1555, DIN8074, AS/NIS4130 standard, le ho amoheloa ke ISO9001-2015, CE, BV, SGS, WRAS.